TEH 210mm 80T TCT Circular Saw Blade Twin Pack | Universal Fit | 30mm Arbor | Wood Plywood & PVC | Fits Evolution & Bosch

The TEH TX180210 is a twin pack of professional-grade 210mm 80-tooth TCT (Tungsten Carbide Tipped) circular saw blades designed for clean, fine-finish cutting in wood, plywood, hardwood, plastic, and PVC. With universal fit compatibility — reduction rings for 25mm, 22mm, 20mm and 16mm arbors included — a 30mm primary arbor, 2.5mm kerf, and max 7500 RPM, these blades fit an exceptionally wide range of mitre saws, table saws, and sliding compound mitre saws straight out of the pack.

The 80-tooth count makes these blades ideal for fine finish cutting — the more teeth, the smoother the cut edge. Where a 40-tooth blade cuts faster but leaves a rougher edge, the 80-tooth delivers a near cabinet-quality finish straight off the saw — ideal for joinery, furniture making, and any application where the cut edge will be visible.

UNIVERSAL FIT — FITS MORE SAWS THAN STANDARD BLADES: Most competitor blades only come with a single 30mm arbor and nothing else. The TEH TX180210 includes four reduction rings — 25mm, 22mm, 20mm, and 16mm — meaning this blade fits the vast majority of 210mm mitre saws and table saws on the market, regardless of arbor size. No need to buy separate adapters. One blade, universal compatibility.

MATERIALS THIS BLADE CUTS:

• Wood — softwood framing, structural timber and hardwood boards
• Plywood — clean edges without splintering or delaminating
• Hardwood — oak, ash, beech and other dense hardwoods
• Plastic — sheet plastic and plastic profiles
• PVC — pipes, window profiles and PVC trim

WHY TWIN PACK: Two blades means you always have a sharp blade ready — swap to the second when the first dulls, then sharpen or replace at your convenience. Ideal for busy workshops, site carpenters, and anyone who cuts regularly and cannot afford downtime.

80 TEETH vs 40 TEETH — WHICH DO YOU NEED?

KEY SPECIFICATIONS:

• Diameter: 210mm
• Teeth: 80T TCT (Tungsten Carbide Tipped)
• Kerf: 2.5mm
• Arbor bore: 30mm
• Reduction rings included: 25mm, 22mm, 20mm, 16mm
• Max speed: 7500 RPM
• Application: Wood, plywood, hardwood, plastic, PVC
• Pack quantity: 2 blades
• SKU: TX180210

COMPATIBLE WITH:

• Evolution Rage mitre saws and table saws
• Bosch mitre saws with 210mm blade capacity
• TEH TMS25518 255mm Compound Mitre Saw
• TEH TMS25519 255mm Sliding Compound Mitre Saw
• Any 210mm mitre saw or table saw with 16-30mm arbor

PERFECT FOR:

• Fine finish crosscuts on hardwood and softwood
• Plywood and MDF — clean splinter-free edges
• Kitchen worktop and door blank trimming
• Skirting board and architrave cutting
• Cabinet and furniture making
• Plastic sheet and PVC profile cutting
• Flooring installation
• Any application requiring a clean, smooth cut finish

⚠️ SAFETY REMINDER: Always check the blade is rated for your saw's RPM before fitting. Ensure the arbor nut is fully tightened before use. Never use a damaged or cracked blade. Always use the correct blade guard. Wear safety glasses and hearing protection when sawing.