TEH TAC100L 100L Oil-Free Air Compressor — Triple Motor 6HP — 300 L/min — 8 Bar — Industrial Use

The TEH TAC100L is an industrial-grade 100-litre oil-free air compressor powered by a triple motor configuration delivering a combined 6HP of output. With a real-world FAD of 360 L/min (12.7 CFM) at 6 Bar and 300 L/min (10.6 CFM) at 8 Bar (116 PSI), the TAC100L is designed for demanding industrial workshops, multi-bay bodyshops, and professional manufacturing environments where sustained high-volume airflow across multiple tools is required throughout the working day.

Equipped with an intelligent digital controller featuring real-time monitoring across all three motors simultaneously, the TAC100L manages motor performance, protects against overload, and maintains consistent pressure delivery regardless of how many tools are connected. The 100% oil-free design eliminates the need for oil changes, removes contamination risk from the airline, and allows instant start with no warm-up time. Built with 100% copper winding motors for maximum thermal efficiency and extended service life.

The TAC100L bridges the gap between professional trade and full industrial output, supporting up to 4 simultaneous pneumatic tools including full-size HVLP spray guns, multiple orbital sanders, industrial air drills, and grinders — all running concurrently without pressure drop. Backed by a 1 year warranty and free UK mainland delivery.

Full Technical Specifications

Performance and Flow Rate Guide

The TAC100L delivers a consistent linear flow curve from 600 L/min at 0 Bar down to 300 L/min at the maximum rated working pressure of 8 Bar (116 PSI). The 8 Bar FAD figure is the confirmed rated factory value. All intermediate figures are derived from the factory performance curve following the same linear decay pattern as the wider TEH range. Always use FAD figures — not displacement — when calculating tool compatibility.

The 8 Bar FAD of 300 L/min (10.6 CFM) is the confirmed factory-rated free air delivery figure. FAD represents actual usable airflow delivered at the outlet at the stated pressure and is always lower than the max displacement figure. Always match tools to FAD values.

Tool Compatibility and Simultaneous Use Guide

The TAC100L is rated for up to 4 simultaneous tools at full working pressure. The guide below confirms compatible applications and airflow requirements.

Continuous Full Support

• Full-size HVLP spray guns (~7 CFM each): Run 1 gun continuously or 2 guns intermittently for full-vehicle bodywork and primer application
• Orbital and DA sanders (~4-6 CFM each): Run 2 simultaneously for continuous multi-workstation sanding operations
• Framing nailers (~2-3 CFM each): Run 3-4 simultaneously for continuous structural and roofing applications
• Industrial air drills and grinders (~8 CFM): Continuous heavy drilling and grinding in professional workshop environments
• Blow guns and air dusters: Continuous multi-station operation — no restriction
• Tyre and wheel service tools: Fully supported for continuous service workshop operation

Simultaneous Multi-Tool Examples

• HVLP spray gun, orbital sander, and framing nailer together: Combined ~16-18 CFM — within rated FAD at 8 Bar
• 2 orbital sanders and 2 blow guns: Combined ~12-14 CFM — supported at rated working pressure
• Air drill, air grinder, framing nailer, and blow gun: Combined ~18-20 CFM — within rated FAD capacity

Not Recommended for Continuous Use

• More than 4 simultaneous tools at full continuous load: For 5-6 simultaneous tools step up to the TAC130L quad motor — 400 L/min FAD at 8 Bar

Perfect For

• Industrial workshops and manufacturing environments
• Professional multi-bay bodyshops and spray painting operations
• Full-vehicle HVLP spray painting and primer application
• Multiple orbital sanding workstations running simultaneously
• HGV and commercial vehicle maintenance
• Production line pneumatic tool support
• Heavy industrial air drills and grinders
• Any demanding professional application requiring up to 4 tools simultaneously

Key Features

• Triple Motor 6HP Configuration: Three independent 1500W copper-wound motors delivering 300 L/min FAD at 8 Bar
• Intelligent Digital Controller: Real-time 3-motor monitoring, overload protection, and auto on/off pressure management
• 300 L/min FAD at 8 Bar: 10.6 CFM confirmed free air delivery at full working pressure
• 100% Copper Winding Motors: Superior thermal efficiency, longer motor life, and consistent output under sustained industrial load
• 100% Oil-Free: Zero maintenance, no oil contamination, clean airline output at all times
• 100-Litre Steel Tank: Large capacity for sustained industrial use with reduced cycling frequency
• Up to 4 Simultaneous Tools: Industrial multi-tool support for busy workshops and production environments
• Instant Start: Ready to work immediately — no warm-up required
• 1 Year Warranty: Full manufacturer warranty covering parts and motors
• Free UK Mainland Delivery: Delivered direct to your workshop door

TEH Oil-Free Air Compressor Range — Full Comparison

The TAC100L is the step below the flagship TAC130L in the TEH industrial range. Use the table below to confirm the right model for your workshop requirements.

* Current model

Below: TEH TAC50L

50L | Twin Motor | 4HP | 200 L/min (7.0 CFM) FAD at 8 Bar | Up to 3 Simultaneous Tools. For professional trade workshops not requiring full industrial output. 16A supply recommended.

Below: TEH TAC24L

24L | Single Motor | 2HP | 100 L/min (3.5 CFM) FAD at 8 Bar | 1-2 Tools | Standard 13A plug. For home DIY and light trade use.

Below: TEH TAC10L

10L | Single Motor | 1.8HP | 127 L/min (4.5 CFM) FAD at 7 Bar | 1 Tool | Standard 13A plug. For portable, lightweight inflation and light task use.

Step Up: TEH TAC130L

130L | Quad Motor | 8HP | 400 L/min (14.1 CFM) FAD at 8 Bar | Up to 6 Simultaneous Tools. For the most demanding industrial, bodyshop, and manufacturing environments. Requires 32A industrial supply.

UK Workshop Installation Guide

Power Requirement

IMPORTANT: The TAC100L requires a 32 Amp Blue Commando industrial socket. The triple motor configuration draws up to 4500W across all three motors. Standard UK 13A or 16A domestic plugs cannot support the startup load of three simultaneous motors. Consult a qualified electrician if your workshop does not currently have a 32A industrial supply installed.

Daily Maintenance

Water condensate will collect in the 100-litre tank during use. Open the drain valve at the base of the tank daily to release condensation and prevent internal corrosion. This takes less than 60 seconds and is essential for long-term tank health and warranty validity.

Positioning

Position the TAC100L on a level, solid workshop floor with at least 500mm clearance on all sides for adequate ventilation around all three motors. Do not operate in enclosed spaces without adequate ventilation.

Warranty and Support

WARRANTY: The TEH TAC100L is covered by a 1 Year Manufacturer Warranty from the date of purchase, covering manufacturing defects in parts and motors under normal operating conditions. Warranty is valid for UK purchases through TEH Tools UK. Daily tank drainage is required to maintain warranty validity.

Know Your Zone

TAC100L — Triple motor | Up to 4 tools | 300 L/min FAD at 8 Bar | Requires 32A industrial supply | Designed for industrial workshops, multi-bay bodyshops, and production line environments.

Need slightly less power? The TEH TAC50L twin motor delivers 200 L/min FAD at 8 Bar and supports up to 3 tools. Runs on a 16A supply.

For lighter professional use: The TEH TAC24L single motor delivers 100 L/min FAD at 8 Bar on a standard 13A plug.

For maximum industrial output: The TEH TAC130L quad motor delivers 400 L/min FAD at 8 Bar and supports up to 6 simultaneous tools. Also requires 32A industrial supply.